Bobber rear fender conversion set with seat | Indian Chief
IMPORTANT!
Please, select your motorcycle type to check suitable articlesBobber rear fender conversion kit with adjustable seat
With this conversion kit you give your Indian Chief a cool and modern Bobber look. For all parts we use only the highest quality materials. The corresponding bobber seat is also adjustable in the distance to the tank. Thus, the conversion also takes into account requirements for perfect ergonomics.
Details:
The rear fender is attached to existing mounting points on the swingarm.
The cables for the turn signals/tail lights are invisibly routed down to the swingarm in the retaining struts.
The seat allows a very relaxed driving style due to its shape and position. It is about 40 mm wider than the original.
The seat height is about 73 cm.
The front position of the seat is about 2 cm further behind the original position and can be adjusted backwards from there by about 45 mm.
The assembly requires a side license plate holder, ideally the one from WUNDERKIND-Custom.
Included in delivery:
Ready shortened, unpainted rear fender made of sturdy sheet steel incl. milled bracket and mounting material.
2 three-dimensional molded retaining braces to mount the fender, gloss black plastic coated.
3D-milled housing at the ends of the retaining struts with integrated LED turn signal and tail lights with E-approval.
Battery compartment and frame cover as solid milled holder frame combined with covers made of stainless steel sheet, anodized black or plastic coated in black satin finish.
Solid seat support, milled from high-strength aluminum, anodized in black.
Forged seat plate, coated in black.
Black comfort seat with diamond stitching and 3D mesh insert, seat width approx. 26 cm.
CNC-milled emblem "WUNDERKIND-Custom" for the seat.
Mounting material.
Note:
We recommend the installation of the parts, due to the special subject of modern Can-Bus systems, in a professional workshop.
Parts are only suitable, on models produced for the European market. Not suitable for US models!
With this conversion kit you give your Indian Chief a cool and modern Bobber look. For all parts we use only the highest quality materials. The corresponding bobber seat is also adjustable in the distance to the tank. Thus, the conversion also takes into account requirements for perfect ergonomics.
Details:
The rear fender is attached to existing mounting points on the swingarm.
The cables for the turn signals/tail lights are invisibly routed down to the swingarm in the retaining struts.
The seat allows a very relaxed driving style due to its shape and position. It is about 40 mm wider than the original.
The seat height is about 73 cm.
The front position of the seat is about 2 cm further behind the original position and can be adjusted backwards from there by about 45 mm.
The assembly requires a side license plate holder, ideally the one from WUNDERKIND-Custom.
Included in delivery:
Ready shortened, unpainted rear fender made of sturdy sheet steel incl. milled bracket and mounting material.
2 three-dimensional molded retaining braces to mount the fender, gloss black plastic coated.
3D-milled housing at the ends of the retaining struts with integrated LED turn signal and tail lights with E-approval.
Battery compartment and frame cover as solid milled holder frame combined with covers made of stainless steel sheet, anodized black or plastic coated in black satin finish.
Solid seat support, milled from high-strength aluminum, anodized in black.
Forged seat plate, coated in black.
Black comfort seat with diamond stitching and 3D mesh insert, seat width approx. 26 cm.
CNC-milled emblem "WUNDERKIND-Custom" for the seat.
Mounting material.
Note:
We recommend the installation of the parts, due to the special subject of modern Can-Bus systems, in a professional workshop.
Parts are only suitable, on models produced for the European market. Not suitable for US models!