Metal rear fender incl. struts with lighting | Harley
IMPORTANT!
Please, select your motorcycle type to check suitable articlesMotorcycle rear fender including support struts with integrated lighting for Harley-Davidson Softail models
Details:
The rear fender is attached to existing mounting points on the lower beam and in the upper area of the rear swing arm. It is not necessary to drill any holes in the frame or swing arm.
The cables for the turn signals/tail lights are routed invisibly down to the swing arm in the support struts.
The support struts are attached to the upper links of the swing arm. The contour of the clamps matches the contour of the tube, which is additionally protected from damage by rubber inserts.
Only in conjunction with a side license plate holder, ideally the one from WUNDERKIND-Custom.
Included in delivery:
Unpainted rear fender made of sturdy sheet steel, including mounting hardware.
Upper and lower brackets for secure attachment of the fender to the swing arm, black plastic-coated.
2 three-dimensional molded support struts with milled clamps to support the fender on the rear swing arm, glossy black plastic coated.
3D-milled housing for mounting the lights at the ends of the support struts with integrated LED turn signals and rear lights (3-in-1 function).
Mounting hardware
Note:
Not suitable with the original seat - We also offer a complete KIT with matching bobber seat in our store.
Due to the special nature of modern Can-Bus systems, we recommend that the parts are installed in a specialist workshop. Parts are only suitable for models produced for the European market. Not suitable for US models!
Attention! It is not necessary to drill into load-bearing parts such as the frame or swing arm during this conversion. This means that the conversion itself is completely reversible.
Details:
The rear fender is attached to existing mounting points on the lower beam and in the upper area of the rear swing arm. It is not necessary to drill any holes in the frame or swing arm.
The cables for the turn signals/tail lights are routed invisibly down to the swing arm in the support struts.
The support struts are attached to the upper links of the swing arm. The contour of the clamps matches the contour of the tube, which is additionally protected from damage by rubber inserts.
Only in conjunction with a side license plate holder, ideally the one from WUNDERKIND-Custom.
Included in delivery:
Unpainted rear fender made of sturdy sheet steel, including mounting hardware.
Upper and lower brackets for secure attachment of the fender to the swing arm, black plastic-coated.
2 three-dimensional molded support struts with milled clamps to support the fender on the rear swing arm, glossy black plastic coated.
3D-milled housing for mounting the lights at the ends of the support struts with integrated LED turn signals and rear lights (3-in-1 function).
Mounting hardware
Note:
Not suitable with the original seat - We also offer a complete KIT with matching bobber seat in our store.
Due to the special nature of modern Can-Bus systems, we recommend that the parts are installed in a specialist workshop. Parts are only suitable for models produced for the European market. Not suitable for US models!
Attention! It is not necessary to drill into load-bearing parts such as the frame or swing arm during this conversion. This means that the conversion itself is completely reversible.
